|
|
VDSL2 CO / CPE Modem
Model No. SP3501C
- ITU-T G993.2 VDSL2 standards fully compliant
- High-speed symmetric bandwidth up to 100 Mbps over 0.3 Km
Micronet introduces the next-generation broadband access solution, with the newest VDSL2 technology, to carriers and MxU (Multi-Dwelling/Multi-Tenant Units) environments that need for new services such as IPTV, video conferencing, VoIP, peer-to-peer file sharing, and interactive gaming. Micronet SP3501C modem are fully compliant with ITU-T G.993.2 VDSL2 standard that is able to provide the newest broadband solution with ADSL-like long-reach performance and high-speed symmetrical bandwidth up to 100Mbps.
Overview
- ITU-T G993.2 VDSL2 standards fully compliant
- Support 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, 30a band profiles
- Support 997, 998 band plan
- Support LR-VDSL2 (US0 / DS0 band)
- High-speed symmetric bandwidth up to 100 Mbps over 0.3 Km
- Supports auto speed for VDSL2 port
- Built-in POTS / ISDN splitter port
- Supports PPPoE, UPnP, NAT, DHCP, DMZ, firewall, router / switch mode
- Supports web-based / console management
Specification
Model |
SP3501C |
Standard |
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
ITU-T G993.2 VDSL2 |
Interface |
2 x RJ-45 10/100Mbps Ethernet ports
1 x RJ-11 connector for EoVDSL
1 x DIP Switch |
Feature |
DMT modulation
Support bandwidth up to 100Mbps Support range up to 3 Km
Surge protection for VDSL2 port
IEEE802.3x for Full Duplex
POTS/ISDN voices pass through
Auto-speed function and full duplex on VDSL port
|
Distance |
Data Rate 100M/100M: 300m(default)
Date Rate 1.5M/5M: 3km |
Management |
DIP Switch
1,Selectable CO or CPE mode
2,Selectable target SNR margin (9dB or 6dB)
3,Selectable High/Low Band
4,Selectable Interleave
VDSL Profile: 17a |
Environment |
Operating temperature: 0°C to 50°C (32 to 122F)
Storage temperature: -20 to 70°C (-4F to 158F)
Operating Humidity: 10 to 90% (non-condensing) |
Power |
DC 12V, 1A, 5W |
Emission |
CE class A, FCC |
Ordering Information
SP3501C VDSL2 Modem , Metal Case
VDSL
Standard |
|
ITU-T G.993.1 (VDSL) |
G.993.1 (Yes);
G.993.2 (VDSL2, Yes) |
Modulation |
DMT |
Hardware |
|
Main Chip |
Metanoia |
VDSL Line |
1 (VDSL2) |
POTS/ISDN Line |
- |
10/100M Port (RJ-45) |
2 |
10/100/1000M Port (RJ-45) |
- |
Transmission |
|
Data Rate (Upstream/ Downstream) |
100/100M |
Transmission Distance |
Up to 3KM(1.3M/3M) |
Switching Feature |
|
IEEE 802.1q, Tag-based VLAN |
- |
IEEE 802.3ad, Link Aggregation |
- |
IEEE 802.1d, STP |
- |
IGMP Snooping |
- |
Port Mirroring |
- |
Broadcast Storm Control |
- |
IEEE 802.1x, Network Access Control |
- |
Others |
|
Device IP Address Assignment |
- |
Management |
DIP Switch |
Temperature |
Operating: 0°C ~ 50°C(32°F ~ 122°F)
Storage: -20°C ~ 70°C (-4°F ~158°F) |
Power Supply |
DC 12V, 1A |
Dimension W x D x H (mm) |
95 x 110 x 27 |
Select features to include in PDF
Click browse answers to questions
About SP3501C, Is there any splitter needed ?
Please find below for the splitter connection,
The SP3501C that are on CPE mode, have to have all of his 4 PINs off? And which are the best configuration to SP3501C on CO mode?
Please see the settings as below,
|
PIN1
(Mode)
|
PIN2
(Band)
|
PIN3
(SNRM)
|
PIN4
(Interleave/INP)
|
ON
|
CO
|
High Band
|
9db
|
8ms/INP=2
|
OFF
|
CPE
|
Low Band
|
6db
|
1ms/INP=0
|
PIN1 on is CO, PIN1 off is CPE.
PIN2~4 is CO only.
We may not guarantee you which configuration will be the best, it depends on what kind of situation do you meet.
If the noise is not a problem, we suggest to set PIN2,3,4 off to improve the speed.
If the noise is too high, you can set PIN3,4 on to make it stable.
Overall, to make it stable and speedy please set PIN3 on.
|
|