Micronet SP390I is a single port, high-power solution for remote powering of current and emerging high power applications. Generating up to 30W, SP390I enables remote power for a new range of applications including 802.11 Access Points, pan-tilt-zoom (PTZ) cameras and video-phones. It complies to IEEE 802.3at PoE standard and is backward compatible to IEEE802.3af. It can power both existing 10/100Base-T network devices and emerging wireless 1000Base-T devices such as IP camera and wireless IEEE 802.11n access points.
Overview
- Up to 30W of Power on 2-pairs
- IEEE 802.3at Compliant with 2-event Classification
- IEEE 802.3af Backward Compatible
- Compatible With All IEEE 802.3af or Legacy
- Safe: Low Power Devices Receive Only the Power They Need
- Safe and Reliable Power to any PoE Powered Devices, i.e. WiFi AP & IP Camera
- Automatic Detection and Protection of Non
Specification
Model |
SP390I |
Standard |
IEEE802.3, 10Base-T
IEEE802.3u, 100Base-TX
IEEE802.3ab, 1000Base-T
IEEE 802.3af
IEEE 802.3at |
Interface |
10/100/1000 Mbps, RJ-45 x 2
(Data In x1, Data and Power Out x 1) |
Hardware |
Pin Assignment and Polarity: 1/2 (+), 3/6(-), 4/5(V+) , 7/8(V-) |
Power Jack Diameter |
Connectors Shielded RJ-45,
EIA 568A and 568B |
Environment |
Operating Temperature: 0~45°C,
Storage: 0~60°C |
Power |
Input: 100-240V, 50-60Hz
Output: 54VDC, 30 Watts |
Dimension, W x D x H |
145 x 64 x 41 mm |
Weight |
182.5g |
Emission |
CE |
Ordering Information
SP390I PoE Injector IEEE 802.3af/at
Click browse answers to questions
Power-over-Ethernet (PoE) eliminates the need to run power to devices on a wired LAN. Using Power-over-Ethernet, installers need to run only a single CAT5/5e Ethernet cable that carries both power and data to each device. This allows greater flexibility and significantly decreases installation costs in many cases.
IEEE 802.3af standard-2003 ratified at June 12, 2003. Power over Ethernet/LAN
1. Transmits low power on the Cat. 5 or 5e TP cable.
2. 44V-57V, 48V DC widely used
3. 350mA maximum,
4. 15.4W maximum per port output
5. 12.95W input deduced power lose on cable distance.